Mitsubishi Electric EZMotion-NC E60 Series, Operation Manual

Page: 339 / 510

9. Graphics
9.4 Use of the Check Modes
I -324
(6) Relation with other functions
Function name
Graphic
check
Remarks
Coordinate system
rotation
Decimal point input
command
Either Type I or Type II is possible.
Mirror image function Refer to (4) of "(8) Precautions".
Z axis cancel function ×
The path is drawn exactly as the commanded
movement.
Interlock ×
External deceleration ×
Override ×
Feed hold ×
Cycle start ×
If CYCLE START is pressed during checking, a
"CHECK EXECUTION" alarm will appear while it is held
down.
Auto-restart × CHECK COMPLETE occurs with M02/M30.
Workpiece coordinate
system offset This is set at the position determined by the offset
amount actually set.
Local coordinate system
offset
Same as above.
Compare stop function ×
The operation does not stop even if the set stop block is
executed.
Helical interpolation
function
× Drawn with straight lines.
Fixed cycle/special fixed
cycle function
Manual mode and
handle
×
During checking, the machine can be moved by
changing the mode to manual or handle feed. Checking
is invalid.
F1 digit feed function ×
Zero point return/start
position return command
× Refer to (Note 1).