manualshive.com logo in svg

Mitsubishi Electric EZMotion-NC E60 Series, Operation Manual, Page: 462 / 510

Share
Download
Mitsubishi Electric EZMotion-NC E60 Series Operation Manual Download Page 462

8.  Maintenance Functions 

8.1  Data Input/Output Function 

 

 

III

-63

 

8.1.4  Parameter Backup 

 

(1) Explanation 

of 

function 

The parameter backup function is used to back up and restore the NC parameters, etc. (including 
options). 
 

(2) Backup 

targets 

The backed up data is ALL1 (table data 1), ALL2 (file data) and ALL3 (PLC Programs) in the "99 
maintenance data" set with data input/output, and the machining programs. Refer to section "8.1.1 
Data Format" for details. 
 

(Note 1) 

Only ALL1 and ALL3 are backed up with E60 system software version A. 

 

(3) Hardware 

configuration 

The backup cassette (HR410 or HR450) is used to backup and restore the data. 
The backup cassette is mounted on CBUS in the NC control unit. 

 

NC control unit (back side) 

CBUS 

 

 

(Note 2) 

The backup cassette HR450 is not compatible with the E60 system software version A. 

 

(4) Operation 

methods 

The data is backed up and restored using the BACKUP screen. Refer to section "4.5 BACKUP 
Screen" in "

I

. OPERATION SECTION" for details on operation. 

 

Summary of Contents for EZMotion-NC E60 Series































































































































































































































































































































































































































































































































Reviews:

No comments