Mitsubishi Electric EZMotion-NC E60 Series, Operation Manual

Page: 176 / 510

4. Parameters (User)
4.3 I/O Parameters
I -161
# Item Contents Setup range (unit)
9607 TIME-OUT SET Specify time-out time at which an interruption of data
transfer during data input/output should be detected.
If 0 is set, time infinity is specified.
0 to 999 (1/10s)
9608 DATA CODE Specify the code to be used.
See "PARITY EFFECTIVE" in #9603.
0: ASCII code
1: ISO code
9609 LINK PARAM. 1 Bit 1: DC1 output after NAK or SYN
Specify whether to output the DC1 code after the
NAK or SYN code is output.
Bit 7: Enable/disable resetting
Specify whether to enable resetting in the
computer link.
0: Don't output the
DC1 code.
1: Output the DC1
code.
0: Enable resetting
in the computer
link.
1: Disable resetting
in the computer
link
9610 LINK PARAM. 2 Bit 2: Specify the control code parity (even parity for
the control code).
Set the parity in accordance with the I/O device
specifications.
Bit 3: Parity V
Specify whether to enable checking of parity V in
one block in data input mode.
0: No control code
parity added
1: Control code
parity added
0: Disable
1: Enable
9611 LINK PARAM. 3 Not used
9612 LINK PARAM.4 Not used
9613 LINK PARAM.5 Not used
9614 START CODE Specify the code by which file data transfer begins at
first.
This parameter is used for a specific user, and set 0
in this parameter for normal operation. 0: DC1 (11H)
1: BEL (07H)
9615 CTRL. CODE OUT Bit 0: NAK output
Specify whether to send the NAK code to the host
if a communication error occurs in computer link
B.
Bit 1: SYN output
Specify whether to send the SYN code to the host
if NC resetting or an emergency stop occurs in
computer link B.
Bit 3: DC3 output
Specify whether to send the DC3 code to the host
when communication ends in computer link B.
0: Do not output the
NAK code.
1: Output the NAK
code.
0: Do not output the
SYN code.
1: Output the SYN
code.
0: Do not output the
DC3 code.
1: Output the DC3
code.