Mitsubishi Electric EZMotion-NC E60 Series, Operation Manual

Page: 206 / 510

5. Program
5.6 PLAYBACK
I
-191
(b) Editing a stored program in playback mode
(1) Display the EDIT screen.
Press the
EDIT
MDI
key, then press
menu keys
EDIT
and
SEARCH
.
SEARCH MAKE LARGE FILE
O ( ) N ( )-( )
The setting area for "SEARCH" is displayed.
SEARCH MAKE LARGE FILE
O 100 PLAYBACK
N 5 G01 X50. Y50.;
N6 X10. Y10. Z10;
EDIT
[MACHINE] [PLAYBACK:ABS]
X 10.100 X 0.000
Y 20.125 Y 0.000
Z 0.000 Z 0.000
[MEMORY]
N5 G01 X50. Y50;
[ADD]
Press the playback switch prepared
on the machine side.
Set the numbers of the program and
sequence to call in the data setting
area, then press the
INPUT
key.
(Example) O ( 100) N ( 5) - ( )
1) The specified program is searched from
the beginning of the block containing the
specified character string, then the
program is displayed with the block
placed on the top.
2) A cursor is placed on the top of the
character string displayed.
3) Program editing starts with the block next
to the specified one. The specified block
is displayed in the [MEMORY] field.
4) Another cursor is displayed in the [ADD]
field, allowing the program to be edited.
In either creating and editing a new program or editing a stored program in playback mode, select the
PROGRAM screen and perform editing on the screen. Editing in playback mode is performed using
the [ADD] field displayed on the right side on the screen. This therefore prevents the machining
program displayed on the left half on the screen from being edited.
The cursor displayed on the left screen indicates the block displayed in the [MEMORY] field on the
right screen.
(c) Invoking and editing an another program in playback mode
Press menu key
SEARCH
again, then repeat the operation described under item (2) .