Mitsubishi Electric EZMotion-NC E60 Series, Operation Manual

Page: 240 / 510

6. Data In/Out
6.1 DATA INPUT
I
-225
6.1.6 Inputting History Data
History data that has been output by history data output operation can be input.
History data input operation is performed with DATA IN/OUT 1 screen.
(Note) History data input operation cannot be performed during automatic operation.
(1) Inputting history data
Set the data type to history data.
# ( 6 0 ) DATA ( )
# ( 60 ) DATA ( )
1) Read of the data is started. The contents of
input data and message "DATA IN
EXECUTION" are displayed.
2) When all data through the end has been input
and the tape end code % (EOR) is read, data
input ends with message "DATA IN
COMPLETE" displayed.
Press the
INPUT
key.
<INPUT DATA>
<COMP. DATA>
DATA IN EXECUTION
# ( 60 ) DATA ( )
<INPUT DATA>
%
<COMP. DATA>
DATA IN COMPLETE
# ( ) DATA ( )