Mitsubishi Electric EZMotion-NC E60 Series, Operation Manual

Page: 207 / 510

5. Program
5.6 PLAYBACK
I
-192
(2) Playback editing
1) Set the parameter to specify whether to perform playback editing in absolute or incremental
mode.
To edit with absolute values, set #1126 PB-G90 to 1, and to edit with incremental values, set to 0.
If the incremental mode is selected, INC is displayed after PLAYBACK on the screen. If the
absolute mode is selected, ABS is displayed.
2) Select the EDIT screen.
SEARCH MAKE SMALL FILE
Press the
EDIT
MDI
key, then press
menu key
EDIT
.
Select
"SEARCH".
SEARCH MAKE SMALL FILE
O ( ) N ( )-( )
Press menu key
SEARCH
.
Specify the program number and playback
mode.
SEARCH MAKE LARGE FILE
O 100 PLAYBACK
N1 G28 XYZ.;
N2 G00 X10. Y10.; EDIT
[MACHINE] [PLAYBACK:ABS]
X 10.100 X 0.000
Y 20.125 Y 0.000
Z 0.000 Z 0.000
[MEMORY]
[ADD]
Press the playback switch prepared
on the machine side.
Specify the numbers of the program,
sequence and block to be edited in
playback mode, then press the
INPUT
key.
(Example) O ( 100) N ( ) - ( )
This operation displays the PLAYBACK screen on
the right half. A data insertion position can be
selected by operating the cursor keys. For the
details, see Section 5.6.2, "Edit Operation".
3) Move the machine in manual mode.
Move the machine from the work
origin to the target position in handle
or jog feed mode.
[PLAYBACK : ABS]
X 0.125
Y 1.034
Z 0.381