Mitsubishi Electric EZMotion-NC E60 Series, Operation Manual

Page: 262 / 510

6. Data In/Out
6.4 PROGRAM COPY
I
-247
6.4.2 Machining Program Condense
The storage efficiency of the machining programs registered in memory may be lowered when
correction such as data deletion or addition is made. When memory is used wastefully, the condense
function can be used to move the intermediate blank portions forward and increase the remaining
number of characters that can be registered.
Set 2 in # ( ) for the condense command. To execute the condense function for all machining
programs registered in memory, set ALL in first 0 ( ).
Press the
INPUT
key.
To condense all work programs
registered in memory
# (2)
O (ALL)
→
O ( )
# (2) O ( ALL)
→
O( )
CONDENSE
EXECUTIN
# (2) O ( ALL)
→
O( )
CONDENSE
COMPLETE
# ( ) O ( )
→
O( )
1) Condense is started and the message
"CONDENSE EXECUTION" is
displayed in the message field.
2) The time required for condense varies
depending on the total number of the
registered machining programs. Do
not turn off the NC power during
condense execution.