Mitsubishi Electric EZMotion-NC E60 Series, Operation Manual

Page: 336 / 510

9. Graphics
9.4 Use of the Check Modes
I -321
2) To check the program block by block in the same manner as in single block operation:
G28 XYZ ;
G00 Y-200.;
[MACHINE]
X 0.000
Y -200.000
Z 0.000
G00 Y-200.;
G01 X-150.F500;
PROGRAM CHECK COMPLETE
Press the menu key
STEP
on
the GRAPHIC screen.
The system executes one block and
stops.
The system executes the next
block and stops.
Press the menu key
STEP
on
the GRAPHIC screen.
Press the menu key
STEP
successively.
The system executes one block each
time the menu key
STEP
is pressed.
The program check stops at the
program end.
Pressing the menu key
STEP
after the
check is completed will start the step
check from the program head.