Mitsubishi Electric EZMotion-NC E60 Series, Operation Manual

Page: 239 / 510

6. Data In/Out
6.1 DATA INPUT
I
-224
6.1.5 Inputting Common Variables
Common variable data that has been output by common variable output operation can be input.
(Note) Common variable data input operation cannot be performed during automatic operation.
(1) Inputting common variable data
Set the data type to common
variable.
# ( 5 ) DATA ( )
# ( 5 ) DATA ( )
1) Read of the data is started.
The contents of input data and message
"DATA IN EXECUTION" are displayed.
2) When all data through the end has been input
and the tape end code % (EOR) is read, data
input ends with message "DATA IN
COMPLETE" displayed.
Press the
INPUT
key.
<INPUT DATA>
<COMP. DATA>
DATA IN EXECUTION
# ( 5 ) DATA ( )
<INPUT DATA>
%
<COMP. DATA>
DATA IN COMPLETE
# ( ) DATA ( )