Mitsubishi Electric EZMotion-NC E60 Series, Operation Manual, Page: 57 / 510

2. Monitor
2.3 COMMAND
I -42
2.3.2 Execution Modal Monitor
By switching the screen from the execution program's monitor screen (in the previous section) by
using the
NEXT
PAGE
key, the execution modal's monitor screen is displayed. This screen mainly displays
the modal values of the active machining program for monitoring.
[M system] [L system]
POSI COORDI COMMAND SEARCH MENU
[MODAL INFORM.] MONITOR 3. 2/3
O12345678 N12345-12 [WORK]
<SUB> O 1000 N 200-30 X 0.000
G01 G18 G91 G94 Y 0.000
G21 G80 G98 G15 G64 Z 0.000
G67 G40.1 G97 G50.1 G43.1
G68 :R=
G50 :P= G54.1 :P48 G08 P0
G41: D1 = 30.000 ; 0.040 G05 :P 3
G43: H20 = 220.550 ; 0.240
: H =
FA 24000.00 S 12345 M 12345678
FM 1200.00 10
FS 0.0000 T 1234 35
B 1234 40
N300 G1 X-100.000 Y12345.678 F2000 ;
POSI COORDI COMMAND SEARCH MENU
[MODAL INFORM.] MONITOR 3. 2/3
O12345678 N12345-12 [WORK]
<SUB> O 1000 N 200-30 X 0.000
G01 G18 G G23 G98 Z 0.000
G21 G40 G80 G C 0.000
G64 G67 G69
G97 G14 G13.1 G43.1
G54.1:P48
Tx: –12.345
Tg : 12 Tw : 12 Tz: 10.000
V 0 Tc: 10.000
FA 24000.00 S 12345 M 12345678
FM 1200.00 10
FS 0.0000 T 1234 35
FE 0.0000 B 1234 40
N300 G1 X-100.000 Y12345.678 F2000 ;
Display item Explanation
O12345678 N12345-12 The currently executing program number, sequence number, and
block number are displayed.
<SUB> O1000
N200-30
When a subprogram is being executed, the program number,
sequence number, and block number of the subprogram are
displayed.
[WORK]
X 100.000
Y 200.000
Z 300.000 The workpiece coordinates in the workpiece coordinate system
being currently executed are displayed.
Same as the POSITION screen.
[MODAL INFORM.]
G01..........G94
G66.1.......G43
The modal state of the current G command being executed is
displayed.
(Note) Fixed cycle operation:
When a fixed cycle command is executed, the G command
in the fixed cycle control subprogram does not reflect the
G modal of the calling program.
G41:D1=30.000:0.040
G43:H20=220.550:0.240
(M system) The tool radius compensation modal and offset number and wear
amount are displayed.
The tool length offset modal and offset number and wear amount
are displayed.