Mitsubishi Electric EZMotion-NC E60 Series, Operation Manual

Page: 501 / 510

Appendix 6. Operation Messages on Setting and Display Unit
IV -29
Error No. Error message Details
E325 FILE NUM ERR
×
• Data transmission to the IC card was attempted in the state
where no file could be added to the IC card directory.
E330 BACKUP FROM
NG
×
• The cassette was in the following state.
Un-mounting
Outside of regulation
Empty data
Invalid data
E331 NO EMG STOP
×
• Emergency stop (EMG) was not applied, so could not be
operated.
E332 RESTORE
ERROR
×
• The restore failed. (The error of manufacturing number.)
E350 TITLE ERROR 1
×
• Data output was performed without inputting title screen
customization data beforehand.
E351 TITLE ERROR 2
×
• The title screen customization data which have been input is not
Bitmap File for Windows.
• Perform the input after converting the data into Bitmap File for
Windows.
E352 TITLE ERROR 3
×
• The setting of the title screen customization data which have
been input is not monochrome bitmap for Bitmap File for
Windows.
• Perform the input after converting the data into the monochrome
setting of Bitmap File for Windows.
E353 TITLE ERROR 4
×
• The compression setting of the title screen customization data
which have been input is not non-compression that applies to the
Bitmap File for Windows.
• Perform the input after saving the data with another drawing
software.
E354 TITLE ERROR 5
×
• The size of the customized title part is exceeding 640 pixels r
250 pixels.
• Perform the input after changing the size to be 640 pixels r 250
pixels.
E355 TITLE ERROR 6
×
• A communication error occurred during input/output of the
bitmap data.
• Check the communication cables and parameters.