Mitsubishi Electric EZMotion-NC E60 Series, Operation Manual

Page: 168 / 510

4. Parameters (User)
4.2 Machining Parameters
I -153
# Item Contents Setup range (unit)
8205 OT-CHECK-P This sets the coordinates or the upper limit
coordinates of the prohibited range of stored stroke
limit IIB of the (+) direction in the moveable range of
the stored stroke limit II. ±99999.999 (mm)
8206 TOOL CHG. P Set the coordinates of the tool change position for
G30. n (tool change position return).
Set with coordinates in the basic machine coordinate
system. ±99999.999 (mm)
8207 G76/87 IGNR
(For M system only)
Select the shift operation at G76 (fine boring) and
G87 (back boring). 0: Shift effective
1: No shift
8208 G76/87 (–)
(For M system only)
Specifies the shift direction at G76 and G87. 0: Shift to (+)
direction
1: Shift to (–)
direction
8209 G60 SHIFT
(For M system only)
Set the last positioning direction and distance for a
G60 (uni-directional positioning) command. ±99999.999 (mm)
8210 OT INSIDE The stored stoke limit function to be set in #8204 and
#8205 prevents the machine from moving to the
inside or outside of the specified range.
0: Inhibits outside area
(select stored stroke limit II.)
1: Inhibits inside area
(select stored stroke limit II B.)
0/1
8211 MIRR. IMAGE Enable or disable the parameter mirror image
function.
0: Disable
1: Enable
0/1