
Lenze · 8400 HighLine · Reference manual · DMS 12.0 EN · 06/2017 · TD23
575
8
Basic drive functions (MCK)
8.7
Manual jog
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.7.1.1
Functional settings
In
, various functional settings for manual jogging can be carried out in bit-coded form.
Function
Lenze setting
Bit 0
Manual jog with breakpoint
During manual jog, a stop is automatically made at the breakpoint positions
set in
• The home position must be known for this function.
• Travelling is continued when the pushbutton is "released" and pressed
again. This button has been assigned the
ManJogPos
and/or
ManJogNeg
control function.
Off
Bit 1
Time-based start of second speed
In manual jog mode, an automatic changeover to manual speed 2 takes
place after a parameterisable waiting time.
Time-based start of second speed (
Off
Bit 2
HW limit switch on
In the "manual jog" operating mode, a travel range monitoring mode via
hardware limit switch is active.
Off
Bit 3
SW limit switch on
In the "manual jog" operating mode, a travel range monitoring mode via
parameterised software limit positions.
Off
Bit 4 Reserved
Off
Bit 5
Maximum jerk
Setting or activation of maximum jerk for traversing profiles (
Off
Bit 6 Reserved
Off
Bit 7
Position controller off
In the "manual jog" operating mode, the position controller is deactivated.
Thus, the compensation of the following error is switched off.
Off