271
CHAPTER 8 16-bit reload timer
■
Operation in Event Count Mode
The operation of the 16-bit reload timer is enabled by setting the timer operation enable bit in the timer
control status register (TMCSR: CNTE) to "1".When the software trigger bit in the timer control status
register (TMCSR: TRG) is set to 1, the 16-bit reload timer is started.When the 16-bit reload timer is started,
the value set in the 16-bit reload register (TMRLR) is reloaded to the 16-bit timer register (TMR), starting
the TMR count operation.After the 16-bit reload timer is started, the edge of the external event clock input
to the TIN pin is detected to perform the TMR count operation.
•
By setting the operation mode select bits in the timer control status register (TMCSR: MOD2 to
MOD0), the detected edge can be selected from the rising edge, falling edge, and both edges.
Figure 8.5-10 Count Operation in Event Count Mode (One-shot Mode)
Figure 8.5-11 Count Operation in Event Count Mode (Reload Mode)
Note:
The level width of the external event clock signal input to the TIN pin should be at least 4 T
(T: machine cycle).
0000
H
-1
FFFF
H
0000
H
-1
FFFF
H
Activating trigger input wait
TIN pin
Counter
Data load signal
CNTE bit
UF bit
Reload
data
TRG bit
TOT pin
T : Machine cycle
: It takes 1T time from trigger input to loading data of reload register.
Reload
data
0000
H
0000
H
0000
H
T
-1
-1
-1
-1
TIN pin
Counter
Data load signal
CNTE bit
UF bit
Reload
data
TRG bit
TOT pin
T : Machine cycle
: It takes 1T time from trigger input to loading data of reload register.
Reload
data
Reload
data
Reload
data
Summary of Contents for F2MC-16LX Series
