•
upstream
— assigns a port or port-channel to the uplink-state group as an
upstream interface.
•
uplink-state-group
— creates an uplink-state group and enables the tracking of
upstream links.
debug uplink-state-group
Enable debug messages for events related to a specified uplink-state group or all groups.
Syntax
debug uplink-state-group [
group-id
]
To turn off debugging event messages, enter the
no debug uplink-state-
group [
group-id
]
command.
Parameters
group-id
Enables debugging on the specified uplink-state group. The
valid group-id values are from 1 to 16.
Defaults
none
Command
Modes
EXEC Privilege
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
clear ufd-disable
— re-enables downstream interfaces that are in a UFD-Disabled
Error state.
description
Enter a text description of an uplink-state group.
Syntax
description
text
Parameters
text
Text description of the uplink-state group. The maximum
length is 80 alphanumeric characters.
Defaults
none
Command
Modes
UPLINK-STATE-GROUP
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell(conf-uplink-state-group-3)#description Testing UFD feature
Dell(conf-uplink-state-group-3)#show config
!
1314
Uplink Failure Detection (UFD)