• EXEC Privilege
Command
History
Version 8.3.16.1
Introduced on the M I/O Aggregator.
Usage
Information
The
monitoring
command is saved in the running configuration at the Monitor
Session mode level and can be restored after a chassis reload.
Example
Dell# show running-config monitor session
!
monitor session 1
source TenGigabitEthernet 0/1 destination TenGigabitEthernet
0/2 direction rx
Related
Commands
monitor session
— creates a session for monitoring.
show monitor session
— displays a monitor session.
source (port monitoring)
Configure a port monitor source.
Syntax
source
interface
|
range
destination
interface
direction {rx |
tx | both}
To disable a monitor source, use the
no source
interface
destination
interface
direction {rx | tx | both}
command.
Parameters
source
interface
Enter the one of the following keywords and slot/port
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For a VLAN interface enter the keyword
VLAN
then by a
number range from 1 to 4094.
• For a port channel interface, enter the keyword
LAG
then
port channel and the port-channel id .
range
Enter the keyword
range
to specify a list of interfaces.
destination
Enter the keyword
destination
to specify the destination
interface.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
1048
Port Monitoring