Dell MXL 10GbE Page 92 Reference Manual Download

Page: 92 / 1545

Command
History

Version 8.3.16.1

Introduced on the MXL 10/40GbE Switch IO Module.

Usage
Information

The password is listed in the configuration file; you can view the password by
entering the

show running-config ftp

command in EXEC mode.

Use the

ip ftp password

command when you use the

ftp: parameter

in the

copy

command.

Related
Commands

copy

— copy files.

ftp-server username

— sets the user name for the FTP sessions.

ip ftp source-interface

Specify an interface’s IP address as the source IP address for FTP connections.

Syntax

ip ftp source-interface

interface

Parameters

interface

Enter the following keywords and slot/port or number
information:

• For Loopback interfaces, enter the keyword

loopback

then a number from zero (0) to 16383.

• For a Port Channel interface, enter the keywords

port-

channel

then a number. The range is from 1 to 128.

• For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet

then the slot/port information.

• For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE

then the slot/port information.

• For a VLAN interface, enter the keyword

vlan

then a

number from 1 to 4094.

Defaults

The IP address on the system that is closest to the Telnet address is used in the
outgoing packets.

Command
Modes

CONFIGURATION

Command
History

Version 8.3.16.1

Introduced on the MXL 10/40GbE Switch IO Module.

Related
Commands

copy

— copies files from and to the switch.

Control and Monitoring

Summary of Contents for MXL 10GbE










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MXL 10GbE

Reviews:

Related manuals for MXL 10GbE

Brands by name

Popular brands

Dell MXL 10GbE, Reference Manual

Search results

Summary of Contents for MXL 10GbE

Reviews:

Related manuals for MXL 10GbE

Brands by name

Popular brands