Version 8.3.16.1
Introduced on the M I/O Aggregator.
Related
Commands
monitor session
— enables a monitoring session.
flow-based enable
Enable flow-based monitoring.
Syntax
flow-based enable
To disable flow-based monitoring, use the
no flow-based enable
command.
Defaults
Disabled, that is flow-based monitoring is not applied.
Command
Modes
MONITOR SESSION (conf-mon-
sess-session-ID
)
Command
History
Version 9.4(0.0)
Added support for the RPM/ERPM.
Version 9.3(0.0)
Introduced on the MXL 10/40GbE Switch IO Module
platform.
Version 8.1.1.0
Introduced on the E-Series ExaScale.
Version 7.4.1.0
Introduced on the E-Series.
Usage
Information
To monitor traffic with particular flows the interface, appropriate ACLs has be
applied in ingress direction. Flow- based is not supported in the tx direction. Even
though we can configure it in both the direction, only rx will work.
The flow- based enable command has to be applied as a monitor session with
some configuration which is already present in it, other wise flow- based will not
take effect.
Related
Commands
monitor session
– enables a monitoring session.
monitor session
Create a session for monitoring traffic with port monitoring.
Syntax
monitor session
session-ID
(type { rpm | erpm })
To delete a session, use the
no monitor session
session-ID
command.
To delete all monitor sessions, use the
no monitor session all
command.
Port Monitoring
1045
