Policy-Based QoS Commands
Policy-based traffic classification is handled with class maps. These maps classify unicast traffic into one
of four classes. The system allows you to match multiple class maps and specify multiple match criteria.
Policy-based QoS is not supported on logical interfaces, such as port-channels, VLANs, or Loopbacks.
bandwidth-percentage
Assign a percentage of weight to the class/queue.
Syntax
bandwidth-percentage
percentage
To remove the bandwidth percentage, use the
no bandwidth-percentage
command.
Parameters
percentage
Enter the percentage assignment of weight to the class/
queue. The range is from 1 to 100% (granularity 1%).
Defaults
none
Command
Modes
CONFIGURATION (conf-qos-policy-out)
Command
History
Version 9.2(0.0)
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The unit of bandwidth percentage is 1%. If the sum of the bandwidth percentages
given to all eight classes exceeds 100%, the bandwidth percentage automatically
scales down to 100%.
Related
Commands
qos-policy-output
— creates a QoS output policy.
description
Add a description to the selected policy map or QoS policy.
Syntax
description {
description
}
To remove the description, use the
no description {
description
}
command.
Parameters
description
Enter a description to identify the policies (80 characters
maximum).
Defaults
none
PMUX Mode of the MXL 10/40GbE Switch I/O Module
1505
