4d21h5m: %STKUNIT0-M P:CP %SEC-5-LOGOUT: Exec session is
terminated for user on
line console
This is the banner
Dell Force10 con0 now available
Press RETURN to get started.
This is the banner
Related
Commands
banner login
— sets a banner for login connections to the system.
banner motd
— sets a Message of the Day banner.
exec-banner
— Enables the display of a text string when you enter EXEC mode.
line
— enables and configures the console and virtual terminal lines to the system.
banner login
Set a banner to display when logging on to the system.
Syntax
banner login {keyboard-interactive | no keyboard-interactive}
[
c line c
]
Parameters
keyboard-
interactive
Enter the keyword
keyboard-interactive
to require a
carriage return (CR) to get the message banner prompt.
c
Enter a delineator character to specify the limits of the text
banner. The delineator is a percent character (%).
line
Enter a text string for your text banner message ending the
message with your delineator. The delineator is a percent
character (%). Range: maximum of 50 lines, up to 255
characters per line
Defaults
No banner is configured and the CR is required when creating a banner.
Command
Modes
CONFIGURATION
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
A login banner message displays only in EXEC Privilege mode after entering the
enable
command then the password. These banners do not display to users in
EXEC mode.
Example
Dell(conf)#banner login ?
keyboard-interactive Press enter key to get prompt
LINE c banner-text(max length 255) c, where
80
Control and Monitoring
