Dell MXL 10GbE Reference Manual Download Page 974

Page: 974 / 1545

global

Enter the keyword

global

to display the packet counts

received on all running OSPF interfaces and packet counts
OSPF neighbors receive and transmit.

interface

name

(OPTIONAL) Enter the keyword

interface

then one of the

following interface keywords and slot/port or number
information:

• For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE

then the slot/port information.

• For Port Channel groups, enter the keywords

port-

channel

then a number. The range is from 1 to 128.

• For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet

then the slot/port information.

• For a VLAN, enter the keyword

vlan

then a number from

1 to 4094.

neighbor

router-id

(OPTIONAL) Enter the keyword

neighbor

then the

neighbor’s router-id in dotted decimal format (A.B.C.D.).

Defaults

none

Command
Modes

• EXEC
• EXEC Privilege

Command
History

Version 8.3.16.1

Introduced on the MXL 10/40GbE Switch IO Module.

Usage
Information

The following describes the

show ip ospf statistics

process-id

global

command shown in the following example.

Row Heading

Description

Total

Displays the total number of packets the OSPF process
receives/transmits.

Error

Displays the error count while receiving and transmitting
packets by the OSPF process.

Hello

Number of OSPF Hello packets.

DDiscr

Number of database description packets.

LSReq

Number of link state request packets.

LSUpd

Number of link state update packets.

LSAck

Number of link state acknowledgement packets.

TxQ-Len

The transmission queue length.

RxQ-Len

The reception queue length.

Tx-Mark

The highest number mark in the transmission queue.

Rx-Mark

The highest number mark in the reception queue.

974

Open Shortest Path First (OSPFv2 and OSPFv3)

Summary of Contents for MXL 10GbE










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MXL 10GbE

Reviews:

Brands by name

Popular brands

Dell MXL 10GbE, Reference Manual

Search results

Summary of Contents for MXL 10GbE

Reviews:

Brands by name

Popular brands