Dell MXL 10GbE Page 571 Reference Manual Download

Page: 571 / 1545

monitor interface

Monitor counters on a single interface or all interfaces on a line card. The screen is refreshed every five
seconds and the CLI prompt disappears.

Syntax

monitor interface [

interface

]

To disable monitoring and return to the CLI prompt, press the

key.

Parameters

interface

(OPTIONAL) Enter the following keywords and slot/port or
number information:

• For the management port, enter the keyword

managementethernet

then the slot (0 or 1) and the port

(0).

• For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet

then the slot/port information.

• For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE

then the slot/port information.

Command
Modes

• EXEC
• EXEC Privilege

Command
History

Version 9.2(0.0)

Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.

Version 8.3.16.1

Introduced on the MXL 10/40GbE Switch IO Module.

Usage
Information

In the Example, the delta column displays changes since the last screen refresh.
The following are the

monitor

command menu options.

Key

Description

systest-3

Displays the host name assigned to the system.

monitor time

Displays the amount of time since the

monitor

interface

command was entered.

time

Displays the amount of time the chassis is up (since last
reboot).

Change the view from a single interface to all interfaces on
the line card or visa-versa.

Refresh the view.

Change the counters displayed from Packets on the
interface to Bytes.

Change the [delta] column from change in the number of
packets/bytes in the last interval to rate per second.

Interfaces

571

Summary of Contents for MXL 10GbE










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MXL 10GbE

Reviews:

Related manuals for MXL 10GbE

Brands by name

Popular brands

Dell MXL 10GbE, Reference Manual

Search results

Summary of Contents for MXL 10GbE

Reviews:

Related manuals for MXL 10GbE

Brands by name

Popular brands