manualshive.com logo in svg

Dell MXL 10GbE, Reference Manual

Share
Download
Dell MXL 10GbE Reference Manual Download Page 516

clear fip-snooping statistics

Clears the statistics on the FIP packets snooped on all VLANs, a specified VLAN, or a specified port 
interface.

Syntax

clear fip-snooping statistics [interface vlan 

vlan-id

 | 

interface 

port-type port/slot

 | interface port-channel 

port-

channel-number

]

Parameters

vlan-id

Enter the VLAN ID of the FIP packet statistics to be cleared.

port-type port/
slot

Enter the port-type and slot number of the FIP packet 
statistics to be cleared.

port-channel-
number

Enter the port channel number of the FIP packet statistics to 
be cleared.

Command 
Modes

EXEC Privilege

Command 
History

Version 9.2(0.0)

Introduced on the M I/O Aggregator. This command is 
supported in Programmable-Mux (PMUX) mode only.

Version 8.3.16.1

Introduced on the MXL 10/40GbE Switch IO Module.

clear fip-snooping statistics

Clears the statistics on the FIP packets snooped on all VLANs, a specified VLAN, or a specified port 

interface.

Syntax

clear fip-snooping statistics [interface vlan 

vlan-id

 | 

interface 

port-type port/slot

 | interface port-channel 

port-

channel-number

]

Parameters

vlan-id

Enter the VLAN ID of the FIP packet statistics to be cleared.

port-type port/
slot

Enter the port-type and slot number of the FIP packet 
statistics to be cleared.

port-channel-
number

Enter the port channel number of the FIP packet statistics to 
be cleared.

Command 
Modes

EXEC Privilege

Command 
History

Version 9.2(0.0)

Introduced on the M I/O Aggregator. This command is 
supported in Programmable-Mux (PMUX) mode only.

516

FIP Snooping

Summary of Contents for MXL 10GbE










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands