Usage
Information
show ip
accounting
access-lists
Field
Description
“Extended IP...”
Displays the name of the IP ACL.
“seq 5...”
Displays the filter. If the keywords
count
or
byte
were
configured in the filter, the number of packets or bytes the
filter processes is displayed at the end of the line.
“order 4”
Displays the QoS order of priority for the ACL entry.
Example
Dell#show ip accounting access-list
!
Standard Ingress IP access list test on TenGigabitEthernet 0/88
Total cam count 2
seq 5 permit 1.1.1.0/24 count (0 packets)
seq 10 deny 2.1.1.0/24 count (0 packets)
Standard IP ACL Commands
When you create an ACL without any rule and then apply it to an interface, the ACL behavior reflects an
implicit permit.
The MXL 10/40GbE Switch IO Module platform supports both Ingress and Egress IP ACLs.
NOTE: Also refer to the
Commands Common to all ACL Types
and
Common IP ACL Commands
sections.
deny (for Standard IP ACLs)
To drop packets with a certain IP address, configure a filter.
Syntax
deny {
source
| any | host {
ip-address
}}[count [byte]] [dscp
value
] [order] [fragments] [log [interval
minutes
] [threshold-
in-msgs [
count
]] [monitor]
To remove this filter, you have two choices:
• Use the
no seq
sequence-number
command if you know the filter’s
sequence number.
• Use the
no deny {
source
[
mask
] | any | host
ip-address
}
command.
Parameters
source
Enter the IP address of the network or host from which the
packets were sent.
Access Control Lists (ACL)
147
