manualshive.com logo in svg

Dell MXL 10GbE, Reference Manual

Share
Download
Dell MXL 10GbE Reference Manual Download Page 625

ip domain-lookup

To address resolution (that is, DNS), enable dynamic host-name.

Syntax

p domain-lookup

To disable DNS lookup, use the 

no ip domain-lookup

 command.

Defaults

Disabled.

Command 
Modes

CONFIGURATION

Command 
History

Version 8.3.16.1

Introduced on the MXL 10/40GbE Switch IO Module.

Usage 
Information

To fully enable DNS, also specify one or more domain name servers with the 

ip 

name-server

 command.

The Dell Networking OS does not support sending DNS queries over a VLAN. DNS 
queries are sent out all other interfaces, including the Management port.

To view current bindings, use the 

show hosts

 command.

Related 
Commands

ip name-server

 — specifies a DNS server.

show hosts

 — Views the current bindings.

ip domain-name

Configure one domain name for the switch.

Syntax

ip domain-name 

name

To remove the domain name, use the 

no ip domain-name

 command.

Parameters

name

Enter one domain name to be used to complete unqualified 
names (that is, incomplete domain names that cannot be 
resolved).

Defaults

Not configured.

Command 
Modes

CONFIGURATION

Command 
History

Version 8.3.16.1

Introduced on the MXL 10/40GbE Switch IO Module.

IPv4 Routing

625

Summary of Contents for MXL 10GbE










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands