Related
Commands
•
ip router isis
— configures IS-IS routing processes for IP on interfaces and
attaches an area designator to the routing process.
•
net
— configures an IS-IS network entity title (NET) for a routing process.
•
is-type
— assigns a type for a given area.
set-overload-bit
To set the overload bit in its non-pseudonode LSPs, configure the router. This setting prevents other
routers from using it as an intermediate hop in their shortest path first (SPF) calculations.
Syntax
set-overload-bit
To return to the default values, use the
no set-overload-bit
command.
Defaults
Not set.
Command
Modes
• ROUTER ISIS (
for IPv4
)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (
for IPv6
)
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
Set the overload bit when a router experiences problems, such as a memory
shortage due to an incomplete link state database which can result in an
incomplete or inaccurate routing table. If you set the overload bit in its LSPs, other
routers ignore the unreliable router in their SPF calculations until the router has
recovered.
show config
Display the changes you made to the IS-IS configuration. Default values are not shown.
Syntax
show config
Command
Modes
• ROUTER ISIS (
for IPv4
)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (
for IPv6
)
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Example
(Router-Isis)
The bold section identifies that Multi-Topology IS-IS is enabled in Transition mode.
Dell(conf-router_isis)#show config
!
router isis
Intermediate System to Intermediate System (IS-IS)
829
