distribute-list out
Suppress network prefixes from being advertised in outbound updates.
Syntax
distribute-list
prefix-list-name
out [connected | bgp
as number
| ospf
process-id
| rip | static]
To return to the default values, use the
no distribute-list
prefix-list-
name
out [bgp
as number
connected | ospf
process-id
| rip |
static]
command.
Parameters
prefix-list-
name
Specify the prefix list to filter prefixes in routing updates.
connected
(OPTIONAL) Enter the keyword
connected
for directly
connected routing process.
ospf
process-id
(OPTIONAL) Enter the keyword
ospf
then the OSPF
process-ID number. The range is from 1 to 65535.
bgp
as number
(OPTIONAL) Enter the BGP then the AS Number. The range is
from 1 to 65535.
rip
(OPTIONAL) Enter the keyword
rip
for RIP routes.
static
(OPTIONAL) Enter the keyword
static
for user-configured
routing process.
Defaults
Not configured.
Command
Modes
• ROUTER ISIS (
for IPv4
)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (
for IPv6
)
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
You can assign a name to a routing process so a prefix list IS applied to only the
routes derived from the specified routing process.
Related
Commands
•
distribute-list in
— filters the networks received in updates.
•
redistribute
— redistributes routes from one routing domain to another routing
domain.
distribute-list redistributed-override
Suppress flapping of routes when the same route is redistributed into IS-IS from multiple routers in the
network.
Syntax
distribute-list redistributed-override in
802
Intermediate System to Intermediate System (IS-IS)
