manualshive.com logo in svg

Dell MXL 10GbE, Reference Manual

Share
Download
Dell MXL 10GbE Reference Manual Download Page 1297

Configuration of IPv6 commands over decapsulate-any tunnel causes an error.

tunnel source

Set a source address for the tunnel.

Syntax

tunnel source {

ip-address

 | 

ipv6–address

 | 

interface-type-

number

}

To delete the current tunnel source address, use the 

no tunnel source 

command.

Parameters

ip-address

Enter the source IPv4 address in A.B.C.D format.

ipv6–address

Enter the source IPv6 address in X:X:X:X::X format.

interface-type-
number

• For a 100/1000 Ethernet interface, enter the keyword 

GigabitEthernet

 then the slot/port information.

• For a 1–Gigabit Ethernet interface, enter the keyword 

GigabitEthernet

 then the slot/port information.

• For a Port Channel interface, enter the keywords 

port-

channel

 then a number from 1 to 128.

• For a 10–Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 then the slot/port information.

• For a VLAN interface, enter the keyword 

vlan

 then a 

number from 1 to 4094.

Defaults

none

Command 
Modes

INTERFACE TUNNEL (conf-if-tu)

Command 
History

Version 9.2(0.0)

Introduced on the MXL 10/40GbE Switch IO Module.

Usage 
Information

If you configure a tunnel interface or destination address, the tunnel source must 
be compatible.

If you configure a tunnel source address as an interface, the tunnel does not 
function until the compatible address is present on the particular interface.

Tunneling 

1297

Summary of Contents for MXL 10GbE










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands