DCBX Commands
The following DCBX commands are supported on the FC Flex IO module installed in the M I/O
Aggregator and MXL 10/40GbE Switch platforms.
advertise dcbx-appln-tlv
On a DCBX port with a manual role, configure the application priority TLVs advertised on the interface to
DCBX peers.
Syntax
advertise dcbx-appln-tlv {fcoe | iscsi}
To remove the application priority TLVs, use the
no advertise dcbx-appln-
tlv {fcoe | iscsi}
command.
Parameters
{fcoe | iscsi}
Enter the application priority TLVs, where:
•
fcoe
: enables the advertisement of FCoE in application
priority TLVs.
•
iscsi
: enables the advertisement of iSCSI in application
priority TLVs.
Defaults
Application priority TLVs are enabled to advertise FCoE and iSCSI.
Command
Modes
PROTOCOL LLDP
Command
History
Version 9.3.0.0
Introduced on the FC Flex IO module installed in the M I/O
Aggregator and MXL 10/40GbE Switch
Usage
Information
To disable TLV transmission, use the
no
form of the command; for example,
no
advertise dcbx-appln-tlv iscsi
.
advertise dcbx-tlv
On a DCBX port with a manual role, configure the PFC and ETS TLVs advertised to DCBX peers.
Syntax
advertise dcbx-tlv {ets-conf | ets-reco | pfc} [ets-conf | ets-
reco | pfc] [ets-conf | ets-reco | pfc]
To remove the advertised ETS TLVs, use the
no advertise dcbx-tlv
command.
Parameters
{ets-conf | ets-
reco | pfc}
Enter the PFC and ETS TLVs advertised, where:
•
ets-conf:
enables the advertisement of ETS
configuration TLVs.
•
ets-reco:
enables the advertisement of ETS
recommend TLVs.
•
pfc:
enables the advertisement of PFC TLVs.
1378
FC Flex IO Modules
