service-class dot1p-mapping
This command maps an 802.1p priority to an internal traffic class.
Syntax
service-class dot1p-mapping
user-priority
Parameters
user-priority
The user-priority value ranges from 0 to 7.
Command
Modes
CONFIGURATION
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Per-Port QoS Commands
Per-port QoS (port-based QoS) allows you to define the QoS configuration on a per-physical-port basis.
dot1p-priority
Assign a value to the IEEE 802.1p bits on the traffic this interface receives.
Syntax
dot1p-priority
priority-value
To delete the IEEE 802.1p configuration on the interface, use the
no dot1p-
priority
command.
Parameters
priority-value
Enter a value from 0 to 7.
dot1p
Queue Number
0
0
1
0
2
0
3
1
4
2
5
3
6
3
7
3
Defaults
none
Quality of Service (QoS)
1073
