Dell MXL 10GbE, Reference Manual

Page: 98 / 1545

Reply to request 5 from 172.31.1.209 0 ms
Reply to request 5 from 172.31.1.66 0 ms
Reply to request 5 from 172.31.1.87 0 ms
Dell#
Example (IPv6)
Dell#ping 100::1
Type Ctrl-C to abort.
Sending 5, 100-byte ICMP Echos to 100::1, timeout is 2 seconds:
!!!!!
Success rate is 100.0 percent (5/5), round-trip min/avg/max =
0/0/0 (ms)
Dell#
reload
Reboot the Dell Networking OS.
Syntax reload
Command
Modes EXEC Privilege
Command
History
Version 8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information If there is a change in the configuration, the Dell Networking OS prompts you to
save the new configuration. Or you can save your running configuration with the
copy running-config
command.
Related
Commands redundancy disable-auto-reboot — Resets any designated stack member except
the management unit.
send
Send messages to one or all terminal line users.
Syntax
send [*] | [line ] | [console] | [vty]
Parameters
* Enter the asterisk character
*
to send a message to all tty
lines.
line Send a message to a specific line. The range is from 0 to 11.
console Enter the keyword
console
to send a message to the
primary terminal line.
vty Enter the keyword
vty
to send a message to the virtual
terminal.
98
Control and Monitoring