manualshive.com logo in svg

Dell MXL 10GbE, Reference Manual

Share
Download
Dell MXL 10GbE Reference Manual Download Page 1334

Defaults

Not configured.

Command 
Modes

VLT DOMAIN

Command 
History

Version 9.2(0.0)

Introduced on the MXL 10/40GbE Switch IO Module.

peer-routing

Enable L3 VLT peer-routing. This command is applicable for both IPV6/ IPV4.

Syntax

peer-routing

To disable L3 VLT peer-routing, use the 

no peer-routing

 command.

Defaults

Disabled.

Command 
Modes

VLT DOMAIN (conf-vlt-domain)

Command 
History

Version 9.4(0.0)

Added the IPV6/IPV4 support on the MXL.

Version 9.2(0.0)

Introduced on the MXL 10/40GbE Switch IO Module.

peer-routing-timeout

Configure the timeout for the software to wait before connecting to a VLT peer with a Down status. This 

command is applicable for both IPV6/ IPV4.

Syntax

peer-routing-timeout 

value

To restore the default value, use the 

no peer-routing-timeout

 command.

Parameters

value

Enter the timeout value in seconds. The range is from 1 to 
65535. The default value is 0 (no timeout).

Command 
Modes

VLT DOMAIN (conf-vlt-domain)

Command 
History

Version 9.4(0.0)

Added the IPV6/IPV4 support on the MXL.

Version 9.2(0.0)

Introduced on the MXL 10/40GbE Switch IO Module.

Usage 
Information

When the timer expires, the software checks to see if the VLT peer is now available. 
If the VLT peer is not available, peer-routing is disabled on that peer.

1334

Virtual Link Trunking (VLT)

Summary of Contents for MXL 10GbE










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands