Usage
Information
The system software resolves the network address the
network
command
configures with the routes in the main routing table to ensure that the networks are
reachable using non-BGP routes and non-default routes.
Related
Commands
redistribute
— redistributes routes into BGP.
network backdoor
Specify this IGP route as the preferred route.
Syntax
network
ip-address
mask
backdoor
To remove a network, use the
no network
ip-address mask
backdoor
command.
Parameters
ip-address
Enter an IP address in dotted decimal format of the network.
mask
Enter the mask of the IP address in the slash prefix length
format (for example, /24).
The mask appears in command outputs in dotted decimal
format (A.B.C.D).
Defaults
Not configured.
Command
Modes
ROUTER BGP
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
Although the system does not generate a route due to the backdoor config, there
is an option for injecting/sourcing a local route in the presence of network
backdoor config on a learned route.
redistribute
Redistribute routes into BGP.
Syntax
redistribute {connected | static} [route-map
map-name
]
To disable redistribution, use the
no redistribution {connected | static}
command.
Parameters
connected
Enter the keyword
connected
to redistribute routes from
physically connected interfaces.
358
Border Gateway Protocol IPv4 (BGPv4)
