Usage
Information
To enable RIP, assign a network address using the
network
command.
Example
Dell(conf)#router rip
Dell(conf-router_rip)#
Related
Commands
network
— enables RIP.
show config
Display the changes you made to the RIP configuration. The default values are not shown.
Syntax
show config
Command
Modes
ROUTER RIP
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell(conf-router_rip)#show config
!
router rip
network 172.31.0.0
passive-interface GigabitEthernet 0/1
Dell(conf-router_rip)#
show ip rip database
Display the routes that RIP learns. If the switch learned no RIP routes, no output is generated.
Syntax
show ip rip database [
ip-address mask
]
Parameters
ip-address
(OPTIONAL) Specify an IP address in dotted decimal format
to view RIP information on that network only. If you enter an
IP address, also enter a mask for that IP address.
mask
(OPTIONAL) Specify a mask, in /network format, for the IP
address.
Command
Modes
EXEC Privilege
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
1126
Routing Information Protocol (RIP)
