29
Link Aggregation Control Protocol (LACP)
This chapter contains commands for Dell Networks’s implementation of the link aggregation control
protocol (LACP) for creating dynamic link aggregation groups (LAGs) — known as port-channels in the
Dell Networking Operating System (OS).
NOTE: For static LAG commands, refer to the
Interfaces
chapter), based on the standards specified
in the IEEE 802.3 Carrier sense multiple access with collision detection (CSMA/CD) access method
and physical layer specifications.
clear lacp counters
Clear port channel counters.
Syntax
clear lacp
port-channel-number
counters
Parameters
port-channel-
number
Enter a port-channel number. The range is from 1 to 128.
Defaults
Without a Port Channel specified, the command clears all Port Channel counters.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
show lacp
— displays the LACP configuration.
debug lacp
Debug LACP (configuration, events, and so on).
Syntax
debug lacp [config | events | pdu [
interface
[in | out]]]
To disable LACP debugging, use the
no [config | events | pdu
[
interface
[in | out]]]
command.
Parameters
config
(OPTIONAL) Enter the keyword
config
to debug the LACP
configuration.
840
Link Aggregation Control Protocol (LACP)
