Row Heading
Description
Hello-Q
The queue, for transmission or reception, for the hello
packets.
LSR-Q
The queue, for transmission or reception, for the link state
request packets.
Other-Q
The queue, for transmission or reception, for the link state
acknowledgement, database description, and update
packets.
The following describes the error definitions for the
show ip ospf statistics
process-id
global
command.
Error Type
Description
Intf_Down
Received packets on an interface that is either down or
OSPF is not enabled.
Non-Dr
Received packets with a destination address of ALL_DRS
even though SELF is not a designated router.
Self-Org
Receive the self originated packet.
Wrong_Len
The received packet length is different to what was
indicated in the OSPF header.
Invld-Nbr
LSA, LSR, LSU, and DDB are received from a peer which is
not a neighbor peer.
Nbr-State
LSA, LSR, and LSU are received from a neighbor with stats
less than the loading state.
Auth-Error
Simple authentication error.
MD5-Error
MD5 error
Cksum-Err
Checksum Error
Version
Version mismatch
AreaMismatch
Area mismatch
Conf-Issue
The received hello packet has a different hello or dead
interval than the configuration.
No-Buffer
Buffer allocation failure.
Seq-no
A sequence no errors occurred during the database
exchange process.
Socket
Socket Read/Write operation error.
Q-overflow
Packets dropped due to queue overflow.
Unknown-Pkt
Received packet is not an OSPF packet.
Example
Dell#show ip ospf 10 statistics global
OSPF Packet Count
Open Shortest Path First (OSPFv2 and OSPFv3)
975
