manualshive.com logo in svg

Dell MXL 10GbE, Reference Manual

Share
Download
Dell MXL 10GbE Reference Manual Download Page 91

Command 
Modes

CONFIGURATION

Command 
History

Version 8.3.16.1

Introduced on the MXL 10/40GbE Switch IO Module.

hostname

Set the host name of the system.

Syntax

hostname 

name

Parameters

name

Enter a text string, up to 32 characters long.

Defaults

Dell

Command 
Modes

CONFIGURATION

Command 
History

Version 9.3(0.0)

Modified the default hostname as Dell.

Version 8.3.16.1

Introduced on the MXL 10/40GbE Switch IO Module.

Usage 
Information

The hostname is used in the prompt. You cannot specify spaces in the hostname. 
Starting with Dell Networking OS version 9.3(0.0), the default hostname is modified 
as Dell instead of FTOS on all of the supported platforms.

ip ftp password

Specify a password for outgoing FTP connections.

Syntax

ip ftp password [

encryption-type

] 

password

Parameters

encryption-
type

(OPTIONAL) Enter one of the following numbers:

•

0

 (zero) for an unecrypted (clear text) password

•

7

 (seven) for a hidden text password

password

Enter a string up to 40 characters as the password.

Defaults

Not configured.

Command 
Modes

CONFIGURATION

Control and Monitoring

91

Summary of Contents for MXL 10GbE










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands