host
For manual (rather than automatic) configurations, assign a host to a single-address pool.
Syntax
host
address
Parameters
address/mask
Enter the host IP address and subnet mask.
Defaults
none
Command
Modes
DHCP <POOL>
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
lease
Specify a lease time for the addresses in a pool.
Syntax
lease {
days
[
hours
] [
minutes
] | infinite}
Parameters
days
Enter the number of days of the lease. The range is from 0 to
31.
hours
Enter the number of hours of the lease. The range is from 0
to 23.
minutes
Enter the number of minutes of the lease. The range is from
0 to 59.
infinite
Specify that the lease never expires.
Defaults
24 hours
Command
Modes
DHCP <POOL>
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
netbios-name-server
Specify the NetBIOS windows internet naming service (WINS) name servers, in order of preference, that
are available to Microsoft dynamic host configuration protocol (DHCP) clients.
Syntax
netbios-name-server
address
[
address2...address8
]
488
Dynamic Host Configuration Protocol (DHCP)