manualshive.com logo in svg

Dell MXL 10GbE, Reference Manual

Share
Download
Dell MXL 10GbE Reference Manual Download Page 1089

policy-map-input

Create an input policy map.

Syntax

policy-map-input 

policy-map-name

 [layer2]

To remove an input policy map, use the 

no policy-map-input 

policy-map-

name

 [layer2]

 command.

Parameters

policy-map-
name

Enter the name of the policy map in character format (32 
characters maximum).

layer2

(OPTIONAL) Enter the keyword 

layer2

 to specify a Layer 2 

Class Map. The default is 

Layer 3

.

Defaults

Layer 3

Command 
Modes

CONFIGURATION

Command 
History

Version 9.2(0.0)

Introduced on the M I/O Aggregator. This command is 
supported in Programmable-Mux (PMUX) mode only.

Version 8.3.16.1

Introduced on the MXL 10/40GbE Switch IO Module.

Usage 
Information

The input policy map is used to classify incoming traffic to different flows using 
class-map, QoS policy, or incoming packets DSCP. This command enables Policy-
Map-Input Configuration mode (conf-policy-map-in).

Related 
Commands

service-queue

 — assigns a class map and QoS policy to different queues.

policy-aggregate

 — allows an aggregate method of configuring per-port QoS 

using policy maps.

service-policy input

 — applies an input policy map to the selected interface.

policy-map-output

Create an output policy map.

Syntax

policy-map-output 

policy-map-name

To remove a policy map, use the 

no policy-map-output 

policy-map-name 

command.

Parameters

policy-map-
name

Enter the name for the policy map in character format (32 
characters maximum).

Quality of Service (QoS)

1089

Summary of Contents for MXL 10GbE










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands