Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide
.
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The number of entries allowed per ACL is hardware-dependent. For detailed
specifications on entries allowed per ACL, refer to your line card documentation.
Example
Dell(conf)#mac-access-list access-list extended TestMATExt
Dell(config-ext-macl)#remark 5 IPv4
Dell(config-ext-macl)#seq 10 permit any any ev2 eq 800 count
bytes
Dell(config-ext-macl)#remark 15 ARP
Dell(config-ext-macl)#seq 20 permit any any ev2 eq 806 count
bytes
Dell(config-ext-macl)#remark 25 IPv6
Dell(config-ext-macl)#seq 30 permit any any ev2 eq 86dd count
bytes
Dell(config-ext-macl)#seq 40 permit any any count bytes
Dell(config-ext-macl)#exit
Dell(conf)#do show mac accounting access-list snickers
interface g0/47 in
Extended mac access-list snickers on GigabitEthernet 0/47
seq 10 permit any any ev2 eq 800 count bytes (559851886
packets 191402152148bytes)seq 20 permit any any ev2 eq 806
count bytes
(74481486 packets 5031686754bytes)seq 30 permit any any ev2 eq
86dd count bytes (7751519 packets 797843521 bytes)
Related
Commands
mac access-list standard
— configures a standard MAC access list.
show mac accounting access-list
— displays MAC access list configurations and
counters (if configured).
permit
To pass packets matching the criteria specified, configure a filter.
Syntax
permit {any | host
mac-address
|
mac-source-address mac-source-
address-mask
} {any | host
mac-address
|
mac-destination-address
mac-destination-address-mask
} [
ethertype operator
] [count
[byte]]
To remove this filter, you have two choices:
• Use the
no seq
sequence-number
command if you know the filter’s
sequence number.
• Use the
no permit {any | host
mac-address
|
mac-source-address
mac-source-address-mask
} {any |
mac-destination-address mac-
destination-address-mask
}
command.
192
Access Control Lists (ACL)
