Field
Description
FDISC - ENode logged in using a fabric discovery (FDISC).
Status
Operational status of the link between a server CNA port
and a SAN fabric: Logged In - Server has logged in to the
fabric and is able to transmit FCoE traffic.
Example
Dell# show npiv devices brief
Total NPIV Devices = 2
---------------------------------------------------------------
----------------------------
ENode-Intf ENode-WWPN FCoE-Vlan Fabric-Intf
Fabric-Map LoginMethod Status
---------------------------------------------------------------
---------------------------
Te 0/12 20:01:00:10:18:f1:94:20 1003 Fc 0/5
fid_1003 FLOGI LOGGED_IN
Te 0/13 10:00:00:00:c9:d9:9c:cb 1003 Fc 0/0
fid_1003 FDISC LOGGED_IN
Usage
Information
The following table describes the
show npiv devices
output shown in the
example below.
Field
Description
ENode [
number
]
A server CNA that has successfully logged in to a fabric over
an M I/O Aggregator and MXL 10/40GbE Switch with the FC
Flex IO module Ethernet port in ENode mode.
Enode MAC
MAC address of a server CNA port.
Enode Intf
Port number of a server-facing Ethernet port operating in
ENode mode.
FCF MAC
Fibre Channel forwarder MAC: MAC address of M I/O
Aggregator and MXL 10/40GbE Switch with the FC Flex IO
module FCF interface.
Fabric Intf
Fabric-facing Fibre Channel port (
slot/port
) on which FCoE
traffic is transmitted to the specified fabric.
FCoE VLAN
ID of the dedicated VLAN used to transmit FCoE traffic from
a server CNA to a fabric and configured on both the server-
facing M I/O Aggregator and MXL 10/40GbE Switch with the
FC Flex IO module port and server CNA port.
Fabric Map
Name of the FCoE map containing the FCoE/FC
configuration parameters for the server CNA-fabric
connection.
Enode WWPN
Worldwide port name of the server CNA port.
Enode WWNN
Worldwide node name of the server CNA.
FC Flex IO Modules
1419
