Dell MXL 10GbE Reference Manual Download Page 615

Page: 615 / 1545

Usage
Information

Retries are 20 seconds apart.

Related
Commands

show arp retries

— displays the configured number of ARP retries.

arp timeout

Set the time interval for an ARP entry to remain in the ARP cache.

Syntax

arp timeout

minutes

Parameters

minutes

Enter the number of minutes. The range is from 0 to 35790.
The default is

240 minutes

Defaults

240 minutes

(4 hours)

Command
Modes

INTERFACE

Command
History

Version 8.3.16.1

Introduced on the MXL 10/40GbE Switch IO Module.

Related
Commands

show interfaces

— displays the ARP timeout value for all available interfaces.

clear arp-cache

Clear the dynamic ARP entries from a specific interface or optionally delete (

no-refresh

) ARP entries

from the content addressable memory (CAM).

Syntax

clear arp-cache [interface | ip

ip-address

] [no-refresh]

Parameters

interface

(OPTIONAL) Enter the following keywords and slot/port or
number information:

• For the Management interface, enter the keyword

ManagementEthernet

then the slot/port information.

The slot range is from 0 to 1 and the port range is 0.

• For a Port Channel interface, enter the keywords

port-

channel

then a number. The range is from 1 to 128.

• For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet

then the slot/port information.

• For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE

then the slot/port information.

• For a VLAN, enter the keyword

vlan

then a number from

1 to 4094.

IPv4 Routing

615

Summary of Contents for MXL 10GbE










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MXL 10GbE

Reviews:

Brands by name

Popular brands

Dell MXL 10GbE, Reference Manual

Search results

Summary of Contents for MXL 10GbE

Reviews:

Brands by name

Popular brands