manualshive.com logo in svg

Dell MXL 10GbE, Reference Manual

Share
Download
Dell MXL 10GbE Reference Manual Download Page 1288

0

Specify that authentication key is entered in an unencrypted 
format (default).

7

Specify that the authentication key is entered in DES 
encrypted format.

key

Enter the authentication key in the previously specified 
format.

Defaults

NTP authentication is not configured by default. If you do not specify the option [

0 

| 

7

], 

0

 is selected by default.

Command 
Modes

CONFIGURATION

Command 
History

Version 8.3.16.1

Introduced on the MXL 10/40GbE Switch IO Module.

Usage 
Information

After configuring the 

ntp authentication-key

 command, configure the 

ntp 

trusted-key

 command to complete NTP authentication.

The Dell Networking OS versions 8.2.1.0 and later use an encryption algorithm to 
store the authentication key that is different from previous versions; beginning in 
version 8.2.1.0, the system uses DES encryption to store the key in the startup-
config when you enter the 

ntp authentication-key

 command. Therefore, if 

your system boots with a startup-configuration from an versions prior to 8.2.1.0 in 
which you have configured 

ntp authentication-key

, the system cannot 

correctly decrypt the key, and cannot authenticate NTP packets. In this case you 
must re-enter this command and save the running-config to the startup-config.

Related 
Commands

ntp authenticate

 — enables NTP authentication.

ntp trusted-key

 — configures a trusted key.

ntp broadcast client

Set up the interface to receive NTP broadcasts from an NTP server.

Syntax

ntp broadcast client

To disable broadcast, use the 

no ntp broadcast client

 command.

Defaults

Disabled.

Command 
Modes

INTERFACE

Command 
History

Version 8.3.16.1

Introduced on the MXL 10/40GbE Switch IO Module.

1288

System Time and Date

Summary of Contents for MXL 10GbE










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands