Usage
Information
Peers that are enabled within a peer group are disabled when their peer group is
disabled.
The
neighbor shutdown
command terminates all BGP sessions on the BGP
neighbor or BGP peer group. Use this command with caution as it terminates the
specified BGP sessions. When a neighbor or peer group is shutdown, use the
show
ip bgp ipv6 unicast summary
command to confirm its status.
Related
Commands
show ip bgp ipv6 unicast summary
— displays the current BGP configuration.
show ip bgp ipv6 unicast neighbors
— displays IPv6 routing information exchanged
by BGP neighbors.
neighbor soft-reconfiguration inbound
Enable a BGP soft-reconfiguration and start storing updates for inbound IPv6 unicast routes.
Syntax
neighbor {
ipv4-address
|
ipv6-address
|
peer-group-name
} soft-
reconfiguration inbound
Parameters
ipv4-address
|
ipv6-address
Enter the IP address of the neighbor for which you want to
start storing inbound routing updates.
peer-group-
name
Enter the name of the peer group for which you want to start
storing inbound routing updates.
Defaults
Disabled.
Command
Modes
ROUTER BGPv6 ADDRESS FAMILY (conf-router_bgpv6_af)
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
This command enables soft-reconfiguration for the specified BGP neighbor. BGP
stores all updates for inbound IPv6 unicast routes the neighbor receives but does
not reset the peer-session.
CAUTION: Inbound update storage is a memory-intensive operation. The
entire BGP update database from the neighbor is stored in memory
regardless of the inbound policy results applied on the neighbor.
Related
Commands
show ip bgp ipv6 unicast neighbors
— displays IPv6 routing information BGP
neighbors exchange.
736
IPv6 Border Gateway Protocol (IPv6 BGP)
