manualshive.com logo in svg

Dell MXL 10GbE, Reference Manual

Share
Download
Dell MXL 10GbE Reference Manual Download Page 934

Defaults

• external 

dist3

 = 

110

• inter-area 

dist2

 = 

110

• intra-area 

dist1

 = 

110

Command 
Modes

ROUTER OSPF

Command 
History

Version 8.3.16.1

Introduced on the MXL 10/40GbE Switch IO Module.

Usage 
Information

To specify a distance for routes learned from other routing domains, use the 

redistribute

 command.

distribute-list in

Apply a filter to incoming routing updates from OSPF to the routing table.

Syntax

distribute-list 

prefix-list-name

 in [

interface

]

To delete a filter, use the 

no distribute-list 

prefix-list-name

 in 

[

interface

]

 command.

Parameters

prefix-list-
name

Enter the name of a configured prefix list.

interface

(OPTIONAL) Enter one of the following keywords and slot/
port or number information:

• For Port Channel groups, enter the keywords 

port-

channel

 then a number. The range is from 1 to 128.

• For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 then the slot/port information.

• For a VLAN, enter the keyword 

vlan

 then a number from 

1 to 4094.

• For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 then the slot/port information.

Defaults

Not configured.

Command 
Modes

ROUTER OSPF

Command 
History

Version 8.3.16.1

Introduced on the MXL 10/40GbE Switch IO Module.

934

Open Shortest Path First (OSPFv2 and OSPFv3)

Summary of Contents for MXL 10GbE










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands