Enter a multicast group address and, optionally, a source
multicast address in dotted decimal format (A.B.C.D) to limit
the information displayed to the multicast routes PIM-SM
snooping discovers for a specified multicast group and
source.
summary
(OPTIONAL) Enter the keyword
summary
to view routes in a
tabular format.
vlt
(OPTIONAL) Enter the keyword
vlt
to view multicast routes
with a spanned incoming interface. Enter a multicast group
address in dotted decimal format (A.B.C.D) to limit the
information displayed to the multicast routes for a specified
multicast group.
count
Enter the keyword
count
to display VLT route and packet
data.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The following describes the
show ip mroute
command shown in the examples.
Field
Description
(S, G)
Displays the forwarding entry in the multicast route table.
uptime
Displays the amount of time the entry has been in the
multicast forwarding table.
Incoming
interface
Displays the reverse path forwarding (RPF) information
towards the source for (S,G) entries and the RP for (*,G)
entries.
Outgoing
interface list:
Lists the interfaces that meet one of the following:
• a directly connected member of the Group
• statically configured member of the Group
• received a (*,G) or (S,G) Join message
Example (static)
Dell#show ip mroute static
Mroute: 23.23.23.0/24, interface: Lo 2
Protocol: static, distance: 0, route-map: none, last change:
00:00:23
Example
(snooping)
Dell#show ip mroute snooping
IPv4 Multicast Snooping Table (*, 224.0.0.0), uptime 17:46:23
Incoming vlan: Vlan 2
Outgoing interface list:
GigabitEthernet 4/13
1336
Virtual Link Trunking (VLT)
