manualshive.com logo in svg

Dell MXL 10GbE, Reference Manual

Share
Download
Dell MXL 10GbE Reference Manual Download Page 1248

Defaults

Enabled.

Command 
Modes

CONFIGURATION

Command 
History

Version 8.3.16.1

Introduced on the MXL 10/40GbE Switch IO Module.

Usage 
Information

When you use the 

no logging on

 command, messages are logged only to the 

console.

Related 
Commands

logging

 — enables logging to the Syslog server.

logging buffered

 — sets the logging buffered parameters.

logging console

 — sets the logging console parameters.

logging monitor

 — sets the logging parameters for the terminal connections.

logging source-interface

Specify that the IP address of an interface is the source IP address of Syslog packets sent to the Syslog 

server.

Syntax

logging source-interface 

interface

To disable this command and return to the default setting, use the 

no logging 

source-interface

 command.

Parameters

interface

Enter the following keywords and slot/port or number 
information:

• For Loopback interfaces, enter the keyword 

loopback 

then a number from zero (0) to 16383.

• For a Port Channel interface, enter the keywords 

port-

channel

 then a number. Tthe range is from 1 to 128.

• For a ten-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 then the slot/port information.

• For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 then the slot/port information.

• For VLAN interface, enter the keyword 

vlan

 then a 

number from 1 to 4094.

Defaults

Not configured.

Command 
Modes

CONFIGURATION

1248

Simple Network Management Protocol (SNMP) and Syslog

Summary of Contents for MXL 10GbE










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands