Parameters
priority
Enter a number as the priority. Enter 255 only if the router’s
virtual address is the same as the interface’s primary IP
address (that is, the router is the OWNER). The range is from
1 to 255. The default is
100
.
Defaults
100
Command
Modes
VRRP
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
To guarantee that a VRRP group becomes MASTER, configure the VRRP group’s
virtual address with same IP address as the interface’s primary IP address and
change the priority of the VRRP group to 255.
If you set the
priority
command to 255 and the
virtual-address
is not equal
to the interface’s primary IP address, an error message appears.
NOTE: Configuring VRRP priority 255 on an interface on which DHCP Client is
enabled is not supported.
show config
View the non-default VRRP configuration.
Syntax
show config [verbose]
Parameters
verbose
(OPTIONAL) Enter the keyword
verbose
to view all VRRP
group configuration information, including defaults.
Command
Modes
VRRP
Command
History
Version 8.3.16.1
Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell(conf-if-vrid-4)#show con
vrrp-group 4
virtual-address 119.192.182.124
!
1350
Virtual Router Redundancy Protocol (VRRP)