manualshive.com logo in svg

Dell MXL 10GbE, Reference Manual

Share
Download
Dell MXL 10GbE Reference Manual Download Page 500

Command 
History

Version 8.3.16.1

Introduced on the MXL 10/40GbE Switch IO Module.

ip dhcp source-address-validation

Enable the IP Source Guard.

Syntax

[no] ip dhcp source-address-validation [ipmac]

Parameters

ipmac

Enable IP+MAC Source Address Validation.

Defaults

Disabled

Command 
Modes

INTERFACE

Command 
History

Version 8.3.16.1

Introduced on the MXL 10/40GbE Switch IO Module.

Usage 
Information

Allocate at least one FP block to 

ipmacacl

 before you can enable IP+MAC Source 

Address Validation.

1.

Use the 

cam-acl l2acl

 command from CONFIGURATION mode.

2.

Save the running-config to the startup-config.

3.

Reload the system.

ip dhcp snooping vlan

Enable DHCP Snooping on one or more VLANs.

Syntax

[no] ip dhcp snooping vlan 

name

Parameters

name

Enter the name of a VLAN on which to enable DHCP 
Snooping.

Defaults

Disabled

Command 
Modes

CONFIGURATION

Command 
History

Version 8.3.16.1

Introduced on the MXL 10/40GbE Switch IO Module.

Usage 
Information

When enabled, the system begins creating entries in the binding table for the 
specified VLANs.

500

Dynamic Host Configuration Protocol (DHCP)

Summary of Contents for MXL 10GbE










































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands