neighbor local-as
To accept external routes from neighbors with a local AS number in the AS number path, configure
Internal BGP (IBGP) routers.
Syntax
neighbor {
ip-address
|
peer-group-name
} local-as
as-number
[no-
prepend]
To return to the default value, use the
no neighbor {
ip-address
|
peer-
group-name
} local-as
command.
Parameters
ip-address
Enter the IP address of the neighbor in dotted decimal
format.
peer-group-
name
Enter the name of the peer group to set the advertisement
interval for all routers in the peer group.
as-number
Enter the AS number to reset all neighbors belonging to that
AS. The range is from 0 to 65535 (2 byte), from 1 to
4294967295 (4 byte) or from 0.1 to 65535.65535 (dotted
format).
no prepend
Specifies that local AS values do not prepend to
announcements from the neighbor.
Defaults
Not configured.
Command
Modes
ROUTER BGP
Command
History
Version 9.2(0.0)
Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
bgp four-octet-as-support
— enables 4-byte support for the BGP process.
neighbor maximum-prefix
Control the number of network prefixes received.
Syntax
neighbor {
ip-address
|
peer-group-name
} maximum-prefix
maximum
[
threshold
] [warning-only]
To return to the default values, use the
no neighbor {
ip-address
|
peer-
group-name
} maximum-prefix
maximum
command.
Parameters
ip-address
Enter the IP address of the neighbor in dotted decimal
format.
peer-group-
name
Enter the name of the peer group.
Border Gateway Protocol IPv4 (BGPv4)
345
